Connect your router with the supplied Ethernet network cable to the PAP2. Now connect your phone to the PAP2 Line 1 port. Finally plug the supplied power cable into the PAP2.

接駁你的路由路到 PAP2，然後在把電話接在 "Phone 1" 的端口上，再把電源線接上PAP2。

如果本PAP2是本公司已設定產品，便可立即使用。
本PAP2是以動態 IP 連接，請確定路由器是使用DHCP獲取IP。

如果未有設定請到 STEP2。

Pickup the phone connected to the PAP2 and dial the * key on your phone 4 times.

拿起听筒接 * * * * 110 #，電腦會說上PAP2 / SPA 的 IP 地址。

Open a web browser on your computer such as Internet Explorer and enter the IP address you heard in step 4 as the address (I.E. where you would normally enter www.yahoo.com).
Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For example if you heard "192.168.001.010" you should change this to "192.168.1.10".

然後在 Internet Expolorer 輸入 PAP2 的 IP 地址 (像日常輸入 www.yahoo.com 位置一樣)

Please note, the PAP2 by default does not have a password assigned to it, so you should now see a page that looks like this:

在正常來說，PAP2沒有之密碼設定的，當進入PAP2介面後會看到這樣：

Now click on the "Admin Login" link as indicated in the picture below:

在右上角按 "Admin Login" :

Now click on the "(switch to advanced view)" link as indicated in the picture below

請在頂頭按 (switch to advanced view)

Click the tab labeled "Line 1" & enter below infomations provide by us.

再在頂頭按 "Line1" 後在適當位置輸入以下資料：

(1) Proxy 伺服器IP: 請輸入 IP address

(2) Port 端口: 5060

(1) User name 用戶名稱: 本公司提供

(2) Display name 顯示名稱: 本公司提供

(3) Password 密碼: 本公司提供

(4) Codec G729a 語音碼: 使用 G729a

(5) 按 "SAVE" 後自動重啟

(6) PAP2 重啟後 "Phone 1" 顯示燈亮了後，便可立即使用。

SPA-1001 Quickstart Guide (Also for PAP2)